Injection molds have three life cycles! Youth Stage: High precision, bright cavities, tight mold fits, every molded part is perfect; Middle stage: Occasional burrs, requiring parameter adjustments and part replacements, but still delivering excellent results. Old stage: Cavities age and deform, leading to frequent mold jams and flash, and skyrocketing repair costs

Price wars may win orders briefly, but quality is the root of the mold industry. A 0.01mm precision error can ruin a whole batch of plastic parts; a slip in trial runs can delay a customer’s entire production line. Our focus on "quality first" isn’t stubbornness—it’s because we’ve seen too many customers anxiety from mold-related losses.

Too large an angle for the mold lifter! What troubles? Exceeding 15°, the lifter bears sharply increased lateral force, bending or breaking in a flash. It also tends to jam during core pulling, causing white marks or cracks on plastic parts. Our veteran mold masters all know: 8°-15° is the golden range – stable and durable.

Injection molded parts always shrink and flash? Most likely, it is because the mold is not selected correctly! A reliable mold can not only solve surface problems, but also directly help you save 30% of the later mold repair costs. Choose GV MOLD to prevent the mold from getting stuck and reduce detours in production.

Are more venting slots better? Adding too many can easily cause material to escape during injection molding, weaken the mold, and shorten its lifespan. Insufficient or improperly designed venting slots can prevent clean exhaust and lead to surface defects. Therefore, the key to venting slot design isn't the number, but rather precise placement and appropriate size.

Want to make injection molded products? Then come to GVMOLD! Mold manufacturing and injection molding are integrated, and the whole process is under control. Hardcore equipment has high-precision processing capabilities. Sufficient production capacity does not affect production progress. Such a worry-free and reliable mold factory is your first choice.

Why do you always think that the mold quotation is so expensive? Good molds are investments, not consumption! Complex design cuts rework; precise processing boosts mass production efficiency; quality steel ensures longevity. The real expense is hidden costs, not the mold itself.

There's a misconception in the mold industry: Many people believe mold cost is determined by mold size. In reality, a palm-sized precision mold, while requiring minimal material, can cost more than a taller rough mold when machined to micron-level precision. Structural complexity, material quality, and precision requirements are the key factors influencing cost.

In the injection mold industry, hard work can help you gain a foothold, but it's hard to withstand the constant industry changes! Breaking through requires refined craftsmanship and superior quality. After all, customers don't want the cheapest molds, but rather a stable output of qualified products.

In the injection mold industry, we always adhere to two core principles: making molds precise and reliable, and making plastic shells impeccable. This is our duty, and it is our solemn commitment to every trust.

What are the principles for the layout of mold ejectors? Uniform and symmetrical layout for balanced force during demolding.Prefer thicker, more rigid areas of plastic parts. Keep away from appearance, mating surfaces to avoid marks. Design reasonable number and specs to prevent demolding issues.

Where does the excellent quality of plastic parts come from? From the screening of raw materials to the micrometer calibration of mold accuracy; From the repeated debugging of injection parameters to the rigorous testing of finished products. Being strict step by step is the key to not losing trust.